Izdelki za stroji za odrezovanje (217)

Rebar cutting machine for fast bars cutting. Cutting antirepetitiveness system. Capacity 1 bar Ø 26 mm 100 cuts/minute Cuts per minute:100 Installed power:2.2 kW Machine's weight:250 kg (550 lb) Machine dimensions:45x85x70(h)cm (18"x33"x28"h)

Rebar shearing machine for fast bars cutting. Cutting antirepetitiveness system. Capacity 1 bar Ø 40 mm (#11) 50 cuts/minute Cuts per minute:50 Installed power:3 kW Machine's weight:650 kg (1435 lb) Machine dimensions:110x65x100(h)cm (43"x26"x39"h)

Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 45 mm (#14) Plate revolving speed 5÷12 RPM Equipped with electronic programmer up to 50 bends Plate revolving speed:5÷12 rpm Installed power:5.5 kW Machine's weight:765 kg (1687 lb) Machine dimensions:114x90x88(h)cm (45"x35"x35"h)

Cage making machine for the production of round cages with welded spirals and preset pitch; max. cage Ø 1600 mm. The machine to produce cylindrical poles CM PRO Telescope is characterized by a reduced longitudinal length. The welding process is performed by a mobile unit and the bar loading zone is a telescope, for this reason, during the welding operation, the length decreases while the welding head moves forward. Min. cage Ø:200 mm (8") Max cage Ø:1600 mm (63") Max cage's weight:7 t (15400 lb) Max cage's length:16 m (52') Wire spiral Ø:6÷16 mm (#3÷#5) Spiral pitch:0÷500 mm (20") Longitudinal bars Ø:12÷32 mm (#3÷#10) Average power consumption:8 kW/h

Integrated plant to cut and stock precut bars made of fast automatic straighteners with rollers (such as RETA) and coil processing up to Ø 20 mm. Pulling speed up to 300 m/min. The plant is fully customizable and modular thanks to a wide range of available accessories. Fast Coil change patented system of automatic horizontal wire change (Optional); Straighteners (horizontalvertical) with electronic and independent setting for double wire feeding; Cutting with Brushless motors with adjustable wire guide, fixed and mobile cutting blades; Rollers for the extraction of the last part of the coil; Teleassistance.

Cage making machine for the production of cylindrical cages with variable pitch welded spiral wrap; max cage Ø 2500 mm. High productivity and flexibility is guaranteed by the configuration of the machine and by the fully automatic welding unit SAF 3000. WIth the machine to produce cylindrical poles CM PRO 2500 it is also possible to produce on the machine square or rectangular cages and cages with the bars bent on the end (90 °bends, bottle necks and pointed).

Automatic double bending machine for bars up to Ø 50 mm (#14). It works automatically and bends any kind of shapes, positive and negative bends included. Version with automatic feeding and discharging units, which fold away (Optional) they allow the minimum distance of 980 mm between the two bending mandrels. Automatic system for bars feeding and discharging Ejection cylinder pneumatic ejector for shapes and mandrels to remove the tools from the toothed part the positions of the clamps and guides on the kick off arms and their adjustment are motorized and automatic Operation by means of digital electric servomotors 4 adjustable bending speeds Bending speed:72°/sec Average power consumption:2 kWh

Stationary bars measuring and cutting plant, with shear operated by servomotor. It has a second transfer rack parallel to the cutting unit. This way, cut bars can be placed on the whole length of the racks optimizing the use. This system enables a better cutting optimization, reducing the amount of scraps. Electromechanical feeding and cutting head; Feeding by means of servomotor; Console with graphic colored touch screen LCD 8’’. Cuts per minute:30 Pulling Speed:115 m/min (380 ft/min) Pulling Speed (Brushless):160 m/min (530 ft/min) Average power consumption:3 kWh

Automatic mesh bending machine, equipped with double gearmotor, fast fitting pins and switch for 3 mechanical programs. It is equipped with Reinforced framework; Bending pin holder; Adjustable mobile bending bar (minimum length 70 mm);

Troncatrici semiautomatiche studiate per selezionare dai difetti e troncare a misura tavole singole o pacchi di piccole, medie, grandi sezioni Semi-automatic cross-cut saws, projected to select and cut single and packs in small, medium, big sections Des scies semi-automatique conçu pour selectionner les defauts et trancher sur mesure tableaux individuels ou paquets de petite, moyenne, grandes section Sierras de corte transversal semi-automáticas, proyectados para seleccionar y cortar a medida tabla individuales y paquetes en pequeñas, medianas, grandes secciones Halbautomatische Kappsägen, die zum beseitigen von fehlern und zum schneiden nach mass von einzelnen Brettern oder Paketen mit kleinen, mittleren und großen Querschnitten entwickelt wurden Pilarki półautomatyczne wypracowane do oznaczania defektów i cięcia na wymiar desek popojedy małych, średnich, dużych sekcji

Cage making machine for the production of cylindrical cages with variable pitch welded spiral wrap; max cage Ø 1100 mm. High productivity and flexibility is guaranteed by the configuration of the machine and by the fully automatic welding unit SAF 3000. With the machine to produce cylindrical poles CM PRO 1100 is also possible to produce on the machine square or rectangular cages and cages with the bars bent on the end (90 °bends, bottle necks and pointed). Min. cage Ø:200 mm (8") Max cage Ø:1100 mm (43") Max cage's weight:3 t (6600 lb) Max cage's length:16 m (52') Wire spiral Ø:6÷16 mm (#3÷#5) Spiral pitch:0÷500 mm (20") Longitudinal bars Ø:12÷32 mm (#3÷#10) Average power consumption:5 kW/h

L’ottimizzatrice ideale per le aziende che vogliono essere competitive The ideal optimizing saw for factories that want to be competitive L’optimiseur ideal pour les sociétés qui veulent être compétitives La tronzadora de optimizacion ideal para las empresas que quieren ser competitivas A otimizadora ideal para as empresas que querem ser competitivas Die ideale optimierkappsäge für unternehmen, die wettbewerbsfähig sein wollen Optymalizerka idealna dla firm, które chcą być konkurencyjne Оптимизирующий станок для компаний, желающих быть конкурентоспособными Idealan optimizator za poduzeća koja žele biti konkurentna

TROE è stata appositamente progettata per la troncatura di tavole non refilate contorte e divise da crepe TROE was especially designed for crosscutting non-trimmed planks that are twisted and separated by cracks Le tronçonneuse a été spécialement projectèe pour le découpe de panneaux reconstitués, torsadés et séparés par des fissures TROE está especialmente diseñada para el corte de tableros sin cantear, retorcidas y separadas por fisuras TROE foi especialmente desenvolvida para o corte de tábuas não cortadas, torcidas e separadas por rachaduras TROE wurde speziell für das Schneiden von verzogenen und gespaltenen unbesäumten Brettern entwickelt Pilarka poprzeczna TROE została specjalnie zaprojektowana do cięcia desek nieprzyciętych, skrzywionych i podzielonych przez pęknięcia Торцовочный станок TROE был разработан для обработки скрученных досок, нескрученных и досок с трещинами Pila TROE dizajnirana je posebno za rezanje neobrezanih i savijenih ploča koje su odvojene pukotinama

Il Laser Tube G-Weike è una macchina da taglio laser ad alte prestazioni progettata per il taglio di tubi rotondi e quadrati con precisione. Con opzioni di potenza laser da 3000W a 12000W e una velocità massima di rotazione di 60 r/min, questa macchina è in grado di gestire compiti di taglio complessi in modo efficiente. La sua gamma di serraggio avanzata e la lunghezza di taglio efficace la rendono un bene prezioso per le industrie che cercano di ottimizzare le loro operazioni di taglio dei tubi.

The Combidrive MO is a cold rolling line with single horizontal drawing capstan for the production of smooth and ribbed wires in bars from Ø 4 to Ø 12 mm. This cold drawing line is completely modular and the rolling process is made through drawing capstan and rollers cassettes for rolling/profiling. Driven by electric asynchronous servomotors digitally controlled. Wire is rolled to reduce the section and if necessary ribbed, then straightened and cut according to the different lengths scheduled. Rotating cut system to ensure continuous production Max. pulling speed (straight bars production) 6 m/s Max. pulling speed (coil production) 8 m/s Compact Layout Highly customizable "Asynchronous servomotor" low highpower consumption User friendly software for cold rolling process management Web Teleassistance Other cold rolling lines Line at 1 or 2 passes with single vertical drawing capstan MV 4 12 mm (12 m/s) Number of pitches:2 Maximum speed:8 m/s Out wire Ø:4÷12 mm

IPC 40 is the plant for the production of radius bars with bends in a single, automatic process. It is composed of the radius machine CER 40, the bidirectionalbending machine P 45 PRO and has an unloading system for the completed bars. It is possible to fabricate 2 bars simultaneously in the diameter range between Ø10 mm and Ø 40 mm. Bending capacity:Ø10 mm (#3) Plate revolving speed:Max. 40 m/min (135 ft/min)

Scanner ottico rilevamento qualità e difetti – produzione continua a velocita’ elevatissima Optical scanner for quality and defects detection – continuous production very high-speed Scanner optique pour detection de qualité et défauts – production continue a grande vitesse Escáner óptico detección calidad y defectos – producción continua de velocidad muy elevada Scanner ótico para detecção de qualidade e defeitos – produção contínua a muito alta velocidade Optischer scanner zur qualitäts- und fehlererkennung – dauerbetrieb bei sehr hoher geschwindigkeit Optyczny skaner do wykrywania jakości i wad – produkcja ciągła z dużą prędkością Оптический сканер определения качества и дефектов – непрерывное производство при максимально высокой скорости Optički skener za detektiranje kvalitete i nedostataka – kontinuirana proizvodnja pri vrlo visokoj brzini

Coil Spider is a safe and small lifting device that, due to its uptodate features, can hook from the outside rolled and drawn coils (either rewinded or not). Coil Spider is equipped with an automatic release and hiding guns (patented) which combined with its reduced dimensions allow it to unload goods from trucks and payoffs quickly and safely also in case of very low cranes. Max. lifting weight:5000 kg (11000 lb) Coil outer diameter:1150÷1400 mm (45"÷55")

Motore elettrico monofase, lama di Ø 315 mm regolabile in altezza L’innovazione, su questo modello, è data dalla trasmissione a cinghia piatta che permette di avere 110 mm di taglio utile, minor attrito, quindi un maggior spunto di partenza. Struttura in lamiera pre_zincata Z200.

2 motorizzazioni uno con motore elettrico monofase ed uno trifase Potenze di 2,2 kw. La lama Ø 450 permette un taglio utile di 160 mm. Il punto di forza di questo modello è la trasmissione a cinghia piatta poly v che diminuisce l’attrito in fase di partenza ed aumenta la trasmissione di potenza durante le fasi di taglio, inoltre, grazie alle dimensioni ridotte delle pulegge, si riesce a sfruttare al meglio l’altezza della lama stessa. Struttura in lamiera di acciaio pre_zincata e verniciata, con supporto porta attrezzi e porta documenti.

Thanks to its innovating system, SBL takes, counts and moves the bars for shearline feeding in a completely automatic way. With SBL you save money and enhance productivity due to its flexibility. Advantages 1. ‘SBL’ is extremely fast so it can feed more bars compared with manual feeding. The result is higher productivity per hour for any kind of shear line. 2. No need of hard and dangerous bar handling so no need of people for such operation resulting in great money saving. 3. The elimination of manual bar feeding enhances security at job site. 4. “SBL” special structure makes it possible to feed shearlines with higher a number of bars of different diameter and length resulting in a. drastic reduction in machine setup; b. plant overall dimensions determined by clients’ room available; c. higher flexibility of the plant.

EASY HOOK lifting device allows the handling of any loads in a fully safe condition. The releasing device allows the operator to discharge the loads automatically, in a very fast and safe way.

La Macchina da Taglio a Fibra Laser (Serie GA) è una soluzione di taglio all'avanguardia progettata per precisione ed efficienza. Con opzioni di potenza laser che vanno da 1500W a 6000W e diverse dimensioni dell'area di lavoro, questa macchina è ideale per tagliare una vasta gamma di materiali con accuratezza. Le sue caratteristiche avanzate e il design robusto la rendono una scelta perfetta per le industrie che cercano di migliorare le proprie capacità di taglio e ottenere risultati superiori.

Machine to cut (EPS) polystyrene blocks in sheets, useful for the production of precast sandwich panels. The machine cuts the blocks horizontally and vertically and obtains polystyrene sheets of different thicknesses and shapes.

TROA, utilizza la stessa robusta meccanica della versione TROE ed è una massiccia macchina da segheria TROA 550 uses the same mechanics of the TROE and is a massive sawmill cross-cut saw TROA, utilise la même mécanique que la version robuste TROE et elle est une machine massive de sciage TROA, utiliza la misma mecánica de la versión robusta TROE y es una gran máquina de aserradero TROA, usa a mesma versão mecânica robusta de TROE e é uma resistente máquina para Serraria TROA verwendet dieselbe robuste Mechanik der Version TROE und ist eine stabile Sägewerksmaschine TROA używa tych samych wytrzymałych mechanizmów co wersja TROE i jest ogromną maszyną tartakową TROA использует ту же прочную механику, что и модель TROE, и является одним из наиболее массивных станков на лесопильных производствах TROA rabi istu čvrstu mehaniku inačice TROE i to je jedan masivan stroj u pilani

Electromechanical automatic mesh cutting and bending machine for the production of U, L, Zshaped mesh and sandwich panels. Mesh handling is guaranteed by clamps driven by electric servomotors. Max mesh width 1250 mm; Max mesh length 6000 mm.

Fast automatic wire straightening and cutting machine, with rollers, for the production of cuttosize wires up to Ø 16 mm (#5). Driven by digital electric servomotors. Max pulling speed 240 m/min (790 ft/min) Straighteners (horizontalvertical) with electronic setting Rollers for the extraction of the last part of the coil (Optional) Automatic 6inlets motorized wire change and insertion unit (Optional) Patented motorized horizontal wire change unit which allows to change the diameter and the coil in "Zero time" (Optional) Web Teleassistance Single strand:1Ø 8÷16 mm (#5) Double strand:2Ø 8÷13 mm (#4) (OPTIONAL) Pulling speed:up to 240 m/min (790 ft/min) Average power consumption:20 kWh

Automatic wire straightening and cutting machine, with rollers, for the production of cuttosize wires up to Ø 13 mm (#4). Driven by digital electric servomotors. Capacity 2 Ø 10 mm (#3) Max pulling speed 150 m/min (495 ft/min) Straighteners with independent position and adjustment displays for the wires Cutting with Brushless Motorized wire change unit Web Teleassistance Single strand:1 Ø 5÷13 mm (#4) Double strand:2 Ø 5÷10 mm (#3) Pulling speed:150 m/min (500 ft/min) Average power consumption:4 kWh

Electromechanical mesh cutting machine. It cuts in two directions thanks to the two kW 3 cutting motors, a kW 0.75 press motor and a kW 0.55 feeding motor. It is equipped with Reinforced framework; Continuous shear cutting unit; Rubber inlaid meshpressing beam.

Electromechanical automatic bar cutting bench with 5 transfer roller tracks and a second additional rebar conveyor. Thanks to the second transfer track, parallel to the cutting unit, cutbars can be placed along the whole length of the roller track optimizing the use. This means that the same roller track can be used to store different orders. Basically, it is as if you had a much greater number of roller tracks allowing a better cutting optimization thus reducing the quantity of scraps. The bar cutting bench "OPTIBAT 5" represents the ideal solution for those working large numbers of smallsized orders and it is especially designed for civil housing. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance. Cuts per minute:30 Pulling Speed:115 m/min (380 ft/min) Pulling Speed (Brushless):160 m/min (530 ft/min) Average power consumption:3 kWh